產品說明： 
    MFI-450型熔體流動速率測定儀是根據GB/T 3682的試驗方法，用于測定熱塑性高聚物在高溫下的流動性，如聚乙烯、聚丙烯、聚甲醛、ABS樹脂、聚碳酸酯、尼龍氟塑料等高聚物。該機采用工業PLC可編程控制器，觸摸屏操作平臺，漢字液晶顯示；該機自動控溫從操作方法上分為手動、時控、自動三種切料方式,能夠?qū)崿F(xiàn)質量法（MFR）和體積法（MVR）兩種試驗方法；該機能夠測得原料在試驗溫度下的熔融密度，系統同時具有溫度校準功能。               
    該機配有微型打印機可打印試驗報告，是目前國內同行業中g(shù)ao檔機型，操作簡單、運行穩定、可長時間進行試驗，深受用戶好評。 
Product manual:

The MFI-450 melt flow rate tester is used to determine the flowability of thermoplastic polymers at high temperatures, such as polyethylene, polypropylene, polyoxymethylene, ABS resins, polycarbonates, according to the test method of GB / T 3682 , Nylon fluoroplastics and other polymers. The machine adopts the industrial PLC programmable controller, the touch screen operation platform, the Chinese character liquid crystal display. The machine automatic temperature control is divided into manual, time control and automatic cutting method, which can realize the quality method (MFR) and the volume method (MVR) two test methods; the machine can measure the raw material at the test temperature of the melt density, the system also has a temperature calibration function. In this case,

The machine is equipped with micro-printer can print test report, is currently in the same industry in the high-end models, simple operation, stable operation, long time to test, praised by users.

執行標準：

試驗參數：  
    測量范圍：0.1-200.00g/10min（MFR） 
         0.1-200.00 cm3/10min（MVR） 
    溫度范圍：常溫+10-450℃ 
    控溫精度：±0.2℃ 
    計時精度：0.1S
    位移精度：0.01mm
    負 荷：全負荷 
    切料方式：手動、時控、自動 
    料筒內徑：9.550mm±0.025mm
    料筒長度：160mm
    口模：材質為碳化鎢、長：8.000mm±0.025mm內徑：2.095mm±0.005mm
    功率：0.45KW
    電源：AC220V 、50Hz
    儀器尺寸：550×340×610mm
    儀器凈重：25Kg

Test parameters:

Measuring range: 0.1-200.00g / 10min (MFR)

0.1-200.00 cm3 / 10min (MVR)

Temperature range: room temperature+10 -450 ℃

Temperature control accuracy: ± 0.5 ℃

Timing accuracy: 0.1S

Displacement accuracy: 0.01mm

Load: full load

Cutting method: manual, time control, automatic

Barrel diameter: 9.550mm ± 0.025mm

Length of cylinder: 160mm

Die: Material for the tungsten carbide, long: 8.000mm ± 0.025mm ID: 2.095mm ± 0.005mm

Power: 0.45KW

Power supply: AC220V, 50Hz

Instrument size: 550×340×610mm

Instrument net weight: 25Kg